Basic molecule drawing/viewing is available free. Extra features may require a paid plan. Crystal/unit-cell support varies between the current app and legacy MolView/Jmol; check the relevant viewer.
02 / LOOK UP
NIST Chemistry WebBook
Open water’s phase-change data, find the Antoine table, and compare the temperature ranges and references of its seven fits. Pick a fit whose range includes your temperature.
Availability differs by compound. The table gives pressure in bar and temperature in kelvin for this equation; verify units on every source.
03 / COMPUTE
Cantera
After installing Cantera, run this methane–air equilibrium example. The three setup/solve statements follow the import. It ran locally with Cantera 3.2.0 and returned 2225.5 K.
import cantera as ct
gas = ct.Solution('gri30.yaml')
gas.TPX = 300, ct.one_atm, 'CH4:1, O2:2, N2:7.52'
gas.equilibrate('HP')
print(f'{gas.T:.1f} K')
Ideal-gas, adiabatic, constant-pressure equilibrium; reactants at 300 K and 1 atm, GRI-Mech 3.0. This is not a prediction of a real burner’s measured temperature.
Open a water stream, specify temperature and pressure, and inspect the equilibrium state with an appropriate property package. Once installed, build a feed → heater → outlet example and check the energy balance.
The open-source simulator supports steady-state and dynamic models. Peng–Robinson, NRTL and UNIFAC serve different purposes; choose with phase behavior and data in mind. First installation takes longer than a minute.
BEFORE TRUSTING A FLOWSHEET
Cross-check one property against measurements.
NIST Antoine fit
log₁₀ P = A − B / (T + C) A = 5.40221 · B = 1838.675 · C = −31.737 Valid here only from 273 to 303 K.
Compare the simulator’s pure-water saturation pressure at this temperature with the source fit. For a pure-water flash at the saturation boundary, vapor fraction also needs an energy or quality specification; temperature and pressure alone do not fix it. A match at one point is a useful check, not validation of a whole mixture flowsheet.