THE RARE LABS LEARNING LIBRARY

Ordinary things.
Unexpected engineering.

Move a slider. Follow a process. Get curious about how things work. Explore 156 lessons, explainers, tools and engineering notes from RARE Labs and the Reflux library.

67 interactive lessons80 library artifacts9 engineering notes
156 resources

Food & everyday science

Why does ice cream turn icy?

Compare a steady freezer with repeated warming and cooling. Same ice volume. A very different crystal structure.

Interactive lesson · SCOOPOpen the experiment →

Food & everyday science

How does water carry grease away?

Give an oily droplet a water-friendly surface, then see what rinsing changes.

Interactive lesson · SOAPOpen the experiment →

Food & everyday science

Why does toast taste like toast?

Explore how surface heat, moisture and reactants shape Maillard browning.

Interactive lesson · TOASTOpen the experiment →

Food & everyday science

How does milk become a gel?

Follow the link from acidity to a connected casein network.

Interactive lesson · YOGURTOpen the experiment →

Heat & energy

Why is spread-out so likely?

Count how many microscopic arrangements give the same left/right particle split.

Interactive lesson · ENTROPYOpen the experiment →

Heat & energy

Where does the heat go?

Heat an ideal gas with a fixed wall or a moving piston. Keep the energy accounts visible.

Interactive lesson · ENTHALPYOpen the experiment →

Heat & energy

Why can’t an engine use all the heat?

Change two reservoir temperatures and watch the ideal work/heat split.

Interactive lesson · CARNOTOpen the experiment →

Chemistry & materials

When pressure needs a correction

Compare pressure with fugacity using an explicit, chosen fugacity coefficient.

Interactive lesson · FUGACITYOpen the experiment →

Food & everyday science

Your coffee is doing calculus

Watch a temperature gap shrink and see how a simple rate rule creates a cooling curve.

Interactive lesson · COFFEEOpen the experiment →

Process design & scale-up

Two equations. One drink.

Choose two ingredient concentrations and solve for the amounts that hit your target.

Interactive lesson · BLENDOpen the experiment →

Separations

How do you push water out of salt water?

Balance applied pressure against osmotic pressure across an ideal selective membrane.

Interactive lesson · OSMOSISOpen the experiment →

Food & everyday science

Why does ketchup wait, then rush?

Separate two ideas: the stress needed to start flow and what happens once it flows.

Interactive lesson · KETCHUPOpen the experiment →

Process design & scale-up

Twice as big changes the problem

Scale a geometrically similar vessel and compare area, volume and their ratio.

Interactive lesson · BIGGEROpen the experiment →

Chemistry & materials

Same temperature. Different feeling.

Put different materials at the same temperature and compare an ideal initial contact temperature.

Interactive lesson · TOUCHOpen the experiment →

Heat & energy

Why leave wind behind?

Adjust an ideal turbine’s slowdown and compare flow through the rotor with extracted power.

Interactive lesson · WINDOpen the experiment →

Heat & energy

An open fridge makes the room warmer

But follow the heat all the way around.

Interactive lesson · COLDOpen the experiment →

Food & everyday science

Why soda bubbles keep starting in the same place

But starting a brand-new bubble is harder than growing one that already has a tiny pocket of gas to work with.

Interactive lesson · SODAOpen the experiment →

Heat & energy

The cold stream can leave hotter than the hot stream

Those outlets are at opposite ends.

Interactive lesson · COUNTEROpen the experiment →

Chemistry & materials

A rubber band can get warmer when you stretch it

There's a stranger result: warm a stretched rubber band under a suitable fixed load, and it can contract.

Interactive lesson · RUBBEROpen the experiment →

Heat & energy

Why a vacuum flask also needs shiny walls

But thermal radiation can cross a vacuum.

Interactive lesson · THERMOSOpen the experiment →

Separations

A carbon filter is more than a tiny sieve

But those places don't have unlimited capacity.

Interactive lesson · CARBONOpen the experiment →

Chemistry & materials

Why hard candy can turn sticky in humidity

Hard candy can be a sugar glass. Moisture can move its glass transition below room temperature.

Interactive lesson · CANDYOpen the experiment →

Chemistry & materials

Why a warm glow stick burns through its glow sooner

You haven't put more energy into a battery. You've changed the rate.

Interactive lesson · GLOWOpen the experiment →

Heat & energy

On an induction stove, the pan becomes the heater

It's also why the cookware matters.

Interactive lesson · INDUCTIONOpen the experiment →

Food & everyday science

One bumpy pumpkin cannot tell the whole story

A warty surface can be a variety feature. It can also appear with disease. Context changes what you can conclude.

Interactive lesson · PUMPKINOpen the experiment →

Chemistry & materials

That disposable hand warmer is controlled rusting

And if you're thinking of those reusable gel packs with a metal clicker, that's a different mechanism.

Interactive lesson · RUSTOpen the experiment →

Food & everyday science

Freeze-drying removes ice without melting it first

And freezing doesn't mean the whole process needs no heat.

Interactive lesson · FREEZEOpen the experiment →

Heat & energy

The spooky fog is not the CO₂

Immersed dry ice makes CO₂ bubbles; the white mist starts as water vapor from the surrounding bulk water.

Interactive lesson · FOGOpen the experiment →

Process design & scale-up

How liquid milk becomes a falling powder

The solids haven't magically appeared. You changed how much water is traveling with them.

Interactive lesson · POWDEROpen the experiment →

Separations

How a cyclone separates dust without a filter screen

But small particles can follow the gas more closely.

Interactive lesson · CYCLONEOpen the experiment →

Heat & energy

100°C is only the beginning of the energy bill

Follow one kilogram from warm water to vapor—and watch where the extra energy goes.

Interactive lesson · HEATOpen the experiment →

Process design & scale-up

Three projects that force you to think like an engineer

Skip the next certificate. Build a cooling experiment, a mixing calculator and a reproduced worked example you can actually finish.

Interactive lesson · PROJECTOpen the experiment →

Chemistry & materials

You can grow a diamond from a gas

Choose a seed, a carbon-containing feed and surface conditions. Then remove one requirement and see why carbon alone is not enough.

Interactive lesson · DIAMONDOpen the experiment →

Process design & scale-up

Why a year of the weight-loss pill takes 73 times more drug than a year of the shot

A swallowed tablet gets only 1 to 2 percent of each dose into the blood. An injection gets about 89 percent, so the pill has to carry far more drug to reach about the same blood level.

Interactive lesson · PILLOpen the experiment →

Chemistry & materials

How a protein-like drug survives your stomach

The drug in the weight-loss pill is a chain of amino acids, and stomach enzymes are built to cut up chains like that. A helper molecule in the tablet, SNAC, protects the drug for a short time. Swallow the tablet with more water and that protection thins out.

Interactive lesson · SNACOpen the experiment →

Heat & energy

Detonation versus deflagration: when a flame outruns sound

The line between an ordinary fire and a detonation is the speed of sound in the gas ahead of the flame, about 340 metres per second in air. Slower than that, the flame is a deflagration. Faster, a shock wave locks onto the flame and it is a detonation.

Interactive lesson · SHOCKOpen the experiment →

Process design & scale-up

Thirteen thousand kilograms in for one kilogram of peptide out

At the commercial and late-trial stage, the standard bead-based way to make a peptide averaged about 13,000 kilograms of inputs, water included, for each kilogram of peptide. The median for small-molecule drugs sits between 168 and 308 kilograms per kilogram.

Interactive lesson · WASTEOpen the experiment →

Chemistry & materials

Build a peptide on a bead

Anchor the first amino acid, uncover the growing end, then add the next. See why small losses add up over thirty rounds.

Interactive lesson · RESINOpen the experiment →

Separations

What comes back from spent carbon?

Fill the pores, choose how to clear them, then repeat. Recovering adsorption sites and keeping the original carbon mass are different problems.

Interactive lesson · SPENTOpen the experiment →

Chemistry & materials

Same molecule. A different crystal.

Ritonavir’s Form II packed the same molecule into a more stable, less soluble crystal. Explore the difference between a chance first appearance and growth from an existing seed.

Interactive lesson · POLYMORPHOpen the experiment →

Process design & scale-up

Why swapping DMF takes more than a solvent label.

A peptide solvent has to swell the resin, dissolve the reagents and support the chemistry. Screen an invented candidate, then see what two good results still leave unanswered.

Interactive lesson · SOLVENTOpen the experiment →

Process design & scale-up

How much plant do you build for an uncertain feed?

Choose a reliable measurement floor and an illustrative design factor. Watch the design basis change, then test what happens when equipment comes in fixed sizes.

Interactive lesson · MARGINOpen the experiment →

Process design & scale-up

A bigger tank changes the clock and the power bill.

Scale a tank and its stirrer together. Hold blade speed, power per litre or blend time constant and compare what each choice costs.

Interactive lesson · MIXINGOpen the experiment →

Chemistry & materials

A short RNA strand needs a lot of washes.

Follow one add-a-letter cycle, then count what happens when two short strands are made. The first letter changes the arithmetic.

Interactive lesson · STRANDOpen the experiment →

Chemistry & materials

Silicon stores more lithium. It also needs room.

Charge silicon and graphite side by side. Then give silicon internal void space and explore why repeated swelling can damage a particle.

Interactive lesson · SWELLOpen the experiment →

Process design & scale-up

The same recipe can make a new impurity.

Slow mixing and a concentrated feed zone can change which reaction wins. Explore an invented process, then compare an entered result with dose-dependent Q3A thresholds.

Interactive lesson · IMPURITYOpen the experiment →

Process engineering

How much solvent can the loop return?

Collecting a waste stream and recovering its solvent are two different steps. Change both to see how much fresh acetonitrile is still needed.

Interactive lesson · RECOVEROpen the experiment →

Medical evidence

What does a VNS responder rate mean?

Read the published outcomes for children and adolescents. Compare seizure reduction, seizure freedom and what different study designs can tell us.

Interactive lesson · VAGUSOpen the experiment →

Process engineering

Draw the box. Count the energy.

Move a boundary from a kettle to a heat exchanger, then isolate the hot stream. The ledger changes when a transfer crosses the line.

Interactive lesson · BALANCEOpen the experiment →

Process design & scale-up

Wider column. Same travel time.

Change the diameter of a packed column, then disturb its packing. See which quantities scale together and which do not.

Interactive lesson · COLUMNOpen the experiment →

Process design & scale-up

A medicine needs more than clinical evidence.

Explore four review gates, then read the scope behind two published sets of complete response letters.

Interactive lesson · MAKEABLEOpen the experiment →

Chemistry & materials

Why does one plastic snap while another folds?

Change temperature and composition, then bend a model sample. Separate glass transition from melting.

Interactive lesson · SOFTENOpen the experiment →

Process design & scale-up

Same boxes. Different arrows.

Choose the boundary in each example. Classify what crosses it as a signal, material or energy, then expand the box and compare.

Interactive lesson · SYSBLOCKSOpen the experiment →

Heat & energy

Where does the energy go when you slow down?

Change an illustrative stop and follow the portions stored in the battery, dissipated at friction brakes and lost to the surroundings.

Interactive lesson · REGENOpen the experiment →

Software & engineering

Five Python projects you can explain.

Give a model an input you can check by hand. Then try one that should fail.

Interactive lesson · PYLABOpen the experiment →

Separations

Recover water. Account for the brine.

One feed, two outlets. Change the recovery and see how much salt each kilogram of reject has to carry.

Interactive lesson · BRINEOpen the experiment →

Heat transfer

How can one unit of work deliver three units of heat?

A heat pump collects energy from outdoors. Move two temperatures to see why its heating COP needs a set of conditions.

Interactive lesson · WARMTHOpen the experiment →

Manufacturing

Why not press a tablet harder?

A tablet can resist a handling load and still admit water slowly. Try the two tests on the same compact.

Interactive lesson · TABLETOpen the experiment →

Modeling

A curve can fit and still miss the pattern

Fit a cooling curve, inspect its errors, then see how it fares on points it never saw.

Interactive lesson · FITDATAOpen the experiment →

Fluid mechanics

Where did the bubble come from?

Follow entrained air and a vapor cavity along the same pump path. One arrives from upstream; the other forms inside the liquid.

Interactive lesson · AIRVAPOROpen the experiment →

Measurement

A smooth signal can still be wrong

Add bias, noise and drift to a synthetic sensor. See what averaging changes, and what needs a reference.

Interactive lesson · BIASOpen the experiment →

Fluid mechanics

The moving film inside a glass

Explore how evaporation, surface-tension gradients and gravity contribute to wine tears.

Interactive lesson · TEARSOpen the experiment →

Heat transfer

Where does hydration heat go?

Change the size and surface cooling of a qualitative concrete model. Compare what happens at its centre and surface.

Interactive lesson · HYDRATEOpen the experiment →

Fluid mechanics

A small speed change can mean a larger power change

Move the fan speed control, calculate the ideal affinity ratios, then see why the system curve matters.

Interactive lesson · FANLAWOpen the experiment →

Mechanics

The road supplies the forward push

Choose a driven or free wheel, predict the force, and follow the tyre’s contact point.

Interactive lesson · GRIPOpen the experiment →

Fluid mechanics

A moving pinch can pump liquid

Advance a peristaltic rotor and follow liquid inside the tube. Then explore an incomplete seal.

Interactive lesson · TUBEPUMPOpen the experiment →

Separations

Where the caffeine goes

Trace caffeine from green beans through CO₂ to recovery, then check what makes a fluid supercritical.

Interactive lesson · DECAFOpen the experiment →

Process design & scale-up

A temporary pipe killed 28 people.

Lift reactor 5 out of the line, bridge the gap with a 20-inch dog-leg between two bellows, then raise the pressure and watch the thrust nobody calculated. Flixborough, 1974, as a management-of-change lesson.

Library artifact · BYPASSExplore the artifact →

Chemistry & materials

Ten minutes is not ten minutes.

Set a volume and a flow, read τ = V/Q, then inject a dye pulse and watch when it actually leaves: a stirred tank against a plug-flow tube.

Library artifact · RESIDENCEExplore the artifact →

Chemistry & materials

Stop at ten. Conversion is not yield.

Move two half-lives and a time cursor through A to B to C. Conversion climbs to 99.6 percent while the product falls from its 50 percent peak to 12.

Library artifact · WAITLISTExplore the artifact →

Flow & equipment

You have just invented the centrifugal pump.

Spin an impeller and read tip speed and ideal head, then lower the pressure at the eye until the water boils.

Library artifact · IMPELLERExplore the artifact →

Flow & equipment

No units. A different kind of flow.

Move speed, diameter and viscosity, then grow an impeller at fixed rpm.

Library artifact · REYNOLDSExplore the artifact →

Chemistry & materials

Same room. Different handshake.

Change material effusivity, calculate initial contact temperature, then explore the whole reactor-jacket heat path.

Library artifact · COLDERExplore the artifact →

Chemistry & materials

Find the product peak.

More starting material consumed does not always mean more saleable product. Explore the reaction, then account for recovery.

Library artifact · PRODUCT PEAKExplore the artifact →

Process design & scale-up

One good run is a starting point.

Keep the runs, compare their conditions, and make the next evidence gap visible before choosing pilot equipment.

Library artifact · LAB EVIDENCEExplore the artifact →

Heat & energy

Close the cooling balance.

Follow the heat through the wall and into the coolant. Watch the outlet warm and the driving temperature gap shrink.

Library artifact · COOLING BALANCEExplore the artifact →

Flow & equipment

A test criterion is not a cavitation guarantee.

Explore NPSH₃, then separate the pump requirement from the suction head available in the system.

Library artifact · NPSH CRITERIONExplore the artifact →

Process design & scale-up

Name the assumption before the order.

Prepare a focused review brief: decision, evidence and the smallest check that could change the choice.

Library artifact · EQUIPMENT DECISIONExplore the artifact →

Process design & scale-up

Find the clock that limits the plant.

Change reaction and filter occupancy to see why a faster reaction can leave batch output unchanged.

Library artifact · BATCH SCHEDULEExplore the artifact →

Flow & equipment

The pump is below the beam.

Move the two valves through a stroke, estimate displacement and explore reservoir inflow.

Library artifact · PUMPJACKExplore the artifact →

Flow & equipment

Smooth flow. Slow heat.

Explore velocity, viscosity and the tube-count tradeoff behind the video.

Library artifact · LAMINAR FLOWExplore the artifact →

Simulation & software

Four tools. Four useful first steps.

Draw a molecule, find measured data, calculate an equilibrium and inspect a flowsheet.

Library artifact · FREE TOOLSExplore the artifact →

Heat & energy

Yellowcake is not the fuel.

A visual guide to uranium material forms, reactor routes and the phase change in the video.

Library artifact · URANIUM CONVERSIONExplore the artifact →

Heat & energy

Size the trap for the job.

Explore how a float trap works, then put the steam-loss example through its assumptions.

Library artifact · STEAM TRAPSExplore the artifact →

Process design & scale-up

You can’t Ctrl+Z a factory.

Test the assumption while the tank is still a design option.

Library artifact · NO UNDOExplore the artifact →

Separations

Power off does not mean heat gone.

Explore what changes when a distillation column loses powered cooling and reflux while heat input persists.

Library artifact · COLUMN BLACKOUTExplore the artifact →

Process design & scale-up

From lab results to a pilot plant

Join the RARE Labs waitlist for teams moving from lab results to a pilot plant. Explore designs with AI and engineering simulators before buying the hardware.

Library artifact · LAB TO PILOTExplore the artifact →

Flow & equipment

A margin on a margin on a margin.

Stack the sizing allowances, watch valve travel fall, and check minimum, normal and maximum flow before choosing the trim.

Library artifact · VALVE SIZINGExplore the artifact →

Chemistry & materials

The furnace has a memory.

Turn down the feed, stretch the residence time, and see why coke belongs in the model. Then check the arithmetic from feed price to product cost.

Library artifact · STEAM CRACKERExplore the artifact →

Process design & scale-up

Before you build the wrong thing.

The $15M / $3M scale-up story, a pilot decision worksheet, and the RARE Labs waitlist.

Library artifact · RARE SCALE UPExplore the artifact →

Separations

The hard part is pulling them apart.

Explore how a small change in selectivity becomes dozens of ideal stages, inspect a mixer-settler, and compare cerium with copper in the crust.

Library artifact · RARE EARTHSExplore the artifact →

Process design & scale-up

100 calls. One new direction.

The RARE Labs launch vision: explore the intended pilot plant builder loop and join the waitlist.

Library artifact · RAREExplore the artifact →

Process design & scale-up

The zone map is a separate calculation.

Explore hazardous-area definitions, ignition-protection principles and the difference between stored energy and an ignition spark.

Library artifact · HAZARDOUS AREASExplore the artifact →

Flow & equipment

A gate is for isolation.

Move the wedge, compare valve characteristics, and see why a smaller opening is not the same as controlled throttling.

Library artifact · GATE VALVEExplore the artifact →

Chemistry & materials

Where does the fluorine go?

Move beyond the filter: follow the PFAS, explore thermal-treatment conditions, and close a PFOA fluorine balance.

Library artifact · FOREVERExplore the artifact →

Flow & equipment

SERIES — Not twice the head

Connect two pumps in series. Watch the impellers, stack the head curves, and find the real duty point on an adjustable system curve.

Library artifact · SERIESExplore the artifact →

Heat & energy

The water carries the heat.

Follow the liquid, watch heat cross the metal, and change the cooling target to see when a chiller is needed.

Library artifact · WATERExplore the artifact →

Simulation & software

Converged does not mean correct.

Close the recycle loop, change the condenser specification, and see the checks that belong between a green tick and a reported answer.

Library artifact · CONVERGEDExplore the artifact →

Flow & equipment

HAMMER | Water hammer explained

Stop 2 m/s of water and add 24 bar. Explore a cutaway pipe, change velocity and length, and see why valve closure time matters.

Library artifact · HAMMERExplore the artifact →

Process design & scale-up

PILOT — What changes after the lab

Grow a reactor and watch jacket area per litre fall. Explore mixing, solids and the four questions a pilot plant answers, with the original 44-plant study.

Library artifact · PILOTExplore the artifact →

Heat & energy

DECAY | The heat after shutdown

Shutting down the chain reaction does not stop decay heat. Explore a reactor cutaway, a decay-heat curve, and the first-day energy integral.

Library artifact · DECAYExplore the artifact →

Flow & equipment

LEVEL | A drum buys you time

Explore the four jobs inside a process drum. Change flow and holdup time, watch the level move, and learn why independent overfill protection matters.

Library artifact · LEVELExplore the artifact →

Process design & scale-up

Why here? The engineering of plant siting

Why chemical plants cluster beside rivers and ports. Explore feed, cooling and separation, then turn heat duty into cooling-water flow.

Library artifact · NOWHEREExplore the artifact →

Food & everyday science

Why fermentation tanks need cooling

Grow a beer fermentation tank from 10 to 1,000 hL. Explore jacket cooling, the batch energy balance, temperature and flavour, and the CO2 count.

Library artifact · BREWExplore the artifact →

Simulation & software

METHOD | Choose a property model you can defend

A visual property-method decision tree, an interactive azeotrope plot, and a checklist for checking the assumptions behind your simulated column.

Library artifact · METHODExplore the artifact →

Flow & equipment

Parallel pumps: two pumps, not twice the flow

Two pumps do not automatically double the flow. Explore the system-curve slider, the shutoff-head check-valve failure and the CHE480 40 bar pump comparison.

Library artifact · PARALLELExplore the artifact →

Separations

Desalination is one pressure balance

Move the recovery slider and see seawater become brine, osmotic pressure climb, and a pressure exchanger return energy to the feed. Includes the SALT pressure ladder and worksheet.

Library artifact · SALTExplore the artifact →

Food & everyday science

Octane: premium is harder to burn, not stronger

Premium gasoline has no more energy in it than regular. The octane number is a score for how well a fuel resists lighting itself before the flame front arrives. This page takes the pump sticker apart into the two lab tests it averages, gives you the four refinery streams with a slider so you can try to hit 87 yourself, and asks the one question that decides whether premium is worth it for your car.

Library artifact · OCTANEExplore the artifact →

Food & everyday science

Why corn syrup is in everything: one enzyme in a steel column

Corn starch becomes glucose, glucose is not sweet enough, so a corn plant pours it through a packed column of beads with an enzyme locked inside until the mix sits near 42 percent fructose. This page has the enzyme drawn as slots with a slider that lets you add sugar or add enzyme and watch which one actually moves the speed, the bead the sugar cannot diffuse into, and the decay clock that makes the plant turn its pumps down week after week.

Library artifact · SYRUPExplore the artifact →

Flow & equipment

The line a compressor never crosses

A centrifugal compressor can only push gas to a limit. Drop the flow past it and the gas stalls, rushes backwards and the pressure collapses, over and over, flipping the thrust on the shaft every cycle. This page has the map with a valve slider so you can drive the operating point into the surge line yourself, the recycle loop with its two second clock, and the one comparison to add to any steady state model so it turns red when it should.

Library artifact · SURGEExplore the artifact →

Separations

Gold cyanide leaching: the gold is in the water

Gold ore is a few grams in a tonne, so a mine does not pick the gold out, it dissolves it. This page has the leach tank with a grade slider that turns grams per tonne into kilos of dissolved gold, the carbon loading curve that says why a plant loads a quarter of what the textbook promises, and the pH loop that keeps the plant from making hydrogen cyanide gas.

Library artifact · GOLDExplore the artifact →

Flow & equipment

The fire that means the plant is safe

Every relief valve in a plant opens into one pipe. This page draws that pipe end to end, from the valves through the knock-out drum and the water seal to the pilots on the tip, has a calculator where you type the relief load and get the flame length, the radiation radius and the stack height it takes to keep people safe at grade, and the three rules a flare has to keep every hour of its life.

Library artifact · FLAREExplore the artifact →

Flow & equipment

Name the case that sized your relief valve

A relief valve is sized for the single worst believable cause, never the sum of them. This page has the scenario list as a checklist you can run on any vessel, a fire-case calculator where you type the wetted area and get the kilograms an hour and the API 526 orifice, and the minute-by-minute of the 2013 reboiler whose relief valve was the right size and was not connected.

Library artifact · RELIEFExplore the artifact →

Heat & energy

The reactor that runs on rock

Canada's reactors run on natural uranium because heavy water swallows 638 times fewer neutrons than ordinary water. This page has the absorption worked out over a path you can drag, the calandria with its fuelling machines running, and the two calculations that run the plant every morning.

Library artifact · CANDUExplore the artifact →

Flow & equipment

Axial flow pumps: the one you start with the valve open

An axial flow pump is a propeller in a pipe: huge flow, almost no lift, and a power curve that is upside down. This page has both curves on one graph with a valve you can close, the specific speed ladder that tells you which pump you actually have, and the one start up rule that follows from it.

Library artifact · AXIALExplore the artifact →

Heat & energy

Why the exchanger you oversized fouls faster

A fouling resistance buys area, the area cuts velocity, and the cut velocity is what lays the deposit down. This page has the tube drawn in four layers with a velocity slider you can drag under the threshold and watch the deposit grow, the 1941 table with what it actually is, and the line to design above.

Library artifact · FOULINGExplore the artifact →

Food & everyday science

The zero calorie sugar that leaves in your urine

Erythritol is a sugar with its reactive end reduced: about 70 percent as sweet, unburnable by your enzymes and your gut bacteria, and filtered straight back out by your kidneys, about 90 percent in your urine within a day. This page has the path through your body, the fermenter and the crystalliser with a titre slider and the oxygen balance that goes with it, and the 2023 heart study laid out next to what the FDA said about it.

Library artifact · SWEETExplore the artifact →

Chemistry & materials

Why 15 percent conversion feeds half the world

Nitrogen is most of the air and plants cannot touch it. Breaking the triple bond takes an iron catalyst, about 400 C and around 200 atmospheres, and even then only about 15 percent reacts per pass. So an ammonia plant is not a reactor, it is a loop. This page has the racetrack with a purge slider that shows the argon piling up as you close it, the steady state balance that sets the number, and why a simulator will not converge this on the first run.

Library artifact · AMMONIAExplore the artifact →

Separations

Why the still is a pot and the column is a tower

Why a whisky still is a pot and a refinery column is a tower, and how engineers size both by drawing stairs on a graph. The McCabe Thiele construction on real ethanol and water data, with a reflux slider that redraws the stairs, the step where theoretical stages become real trays, and the two numbers that turn a count into a height.

Library artifact · STAIRSExplore the artifact →

Flow & equipment

Which way does your fuel valve fail?

A control valve is a spring fighting compressed air. Cut the air and the spring wins, and the end it drives to is set by the actuator, not the valve. Here is the actuator drawn in section with a switch that moves the air to the other side of the diaphragm, the loss-of-signal case nobody draws, the seven minutes a screen read open over a shut valve, and the plant-wide case where every valve fails at once.

Library artifact · FAILExplore the artifact →

Food & everyday science

Cold is not what kills it

Your phone and cold honey fail for the same reason, and cold is not what kills your battery. A lithium cell is a tiny chemical reactor: ions swim through a liquid, cross a thin skin on the graphite and slot in. Cold thickens the liquid so they crawl, one standard cell held 13 percent at minus 10 C, and it all comes back when it warms. What kills the battery is charging in the cold: ions that cannot slot in plate onto the graphite as lithium metal, for good. Heat grows the skin instead, so ageing is V-shaped. The cell drawn in section, a temperature slider, the V, the pack and its coldest cell.

Library artifact · BATTERYExplore the artifact →

Simulation & software

What an AI driving a simulator actually does

What an AI agent driving a simulator actually does, step by step. You say what you want, the agent picks a tool, the forty-year-old solver you already trust does the math, the agent reads the numbers back and decides what to do next. The model chooses, the solver computes, so a wrong choice gives you a wrong number and not an invented one. Plus the sentence COMSOL and MathWorks both used this year, and a worked stabiliser case you can move yourself.

Library artifact · AGENTExplore the artifact →

Separations

Why a paper mill smells like that

Why a kraft pulp mill smells the way it does. The cook dissolves lignin with caustic soda and sodium sulfide, and the sulfide makes four sulfur gases; your nose catches one of them at 70 parts per trillion. The sharp note is the bleach plant and its chlorine dioxide. And the mill recovers 96 to 98 percent of its cooking chemical around a loop, so the smell is the few percent that gets away.

Library artifact · KRAFTExplore the artifact →

Simulation & software

The run that converged and was wrong

Aspen Plus writes one line when it has no binary parameters: BINARY PARAMETERS FOR ALL COMPONENT PAIRS ARE ZERO, YOUR RESULTS MAY NOT BE ACCURATE. Then it runs and converges. Zero means ideal: no azeotropes, no liquid split. Here is the exact warning to search your log for, the two columns drawn to scale, the Fenske arithmetic you can do yourself, and the one checkbox that fixes most of it.

Library artifact · ZEROExplore the artifact →

Flow & equipment

Pipe Sizing: Two Numbers and a Constant Nobody Can Derive

The two numbers that size every line in a plant: about 1 psi of pressure drop per 100 feet of liquid line and about 20 m/s for gas. Why both are ceilings, what happens above and below them, the velocity bands for liquids, gases and steam in one table, and the story of the API RP 14E erosion constant of 100 that came from a wartime Navy figure of 160 and whose theoretical basis a 2019 review calls unclear.

Library artifact · PIPEExplore the artifact →

Flow & equipment

What a control loop actually does

What a control loop actually does, with one tank. A level never settles on its own: a sensor reads it, a controller compares it to the setpoint, a valve moves. P is the error now, I is the error added up, D is where it is heading. Tune one yourself, and see the survey of 26,000 real loops where only one in three was doing its job.

Library artifact · LOOPExplore the artifact →

Process design & scale-up

The three drawings a plant is before it exists

The three drawings a chemical plant is before it exists: the block flow diagram, the process flow diagram and the P&ID. The same pump drawn all three ways, the tag rule that lets you read any sheet, and the two numbers that size every pipe.

Library artifact · PIDExplore the artifact →

Process design & scale-up

A Chemist's Number Becomes a Tank

Where a chemist's work ends and a chemical engineer's starts: one number. The rate. Volume equals feed times conversion divided by rate, why a stirred tank has to be bigger than a tube for the same duty, and why 'rate doubles every 10 degrees' is not a law but one activation energy near room temperature.

Library artifact · VOLUMEExplore the artifact →

Flow & equipment

Knock-Out Drums: An Empty Can Sized by a Square Root

What a knock-out drum does and why one sits in front of every compressor: gas squeezes and liquid does not, so a slug can wreck a cylinder in one revolution. The Souders-Brown equation worked for three real gases, the mesh pad's real job, the residence-time table for all four vessel types, and the one number that changes when the pressure goes up.

Library artifact · KNOCKOUTExplore the artifact →

Process design & scale-up

The Tank in the Fire

What a BLEVE is and how a propane sphere gets there: why the liquid is a liquid at 8.4 bar, why the steel above the liquid line is the part that fails, what happens when 62.1 degrees of superheat is released at once, the full blast overpressure table, and the three things a design report has to size before a vessel is allowed near a fence.

Library artifact · BLEVEExplore the artifact →

Separations

Why a column is a dial between stages and fuel

Reflux ratio explained: what R = L / D actually is, why total reflux gives the fewest stages and no product, why minimum reflux needs infinite stages, and what every drop you pour back costs in boil-up. With a live McCabe-Thiele stepper.

Library artifact · REFLUXExplore the artifact →

Separations

Flood and Weep: How a Column Dies

The three ways a distillation tray fails: jet flood, downcomer flood and weeping. The capacity diagram they make, why every tray is designed to 80% of flood, and how half a metre of tray spacing turns 187 trays into a 94 metre column.

Library artifact · FLOODExplore the artifact →

Separations

Why You Cannot Distil Past 96%: The Ethanol Azeotrope

Why no column reaches 100% ethanol: the vapour-liquid equilibrium curve touches the 45-degree line at 0.894 mole fraction, 95.6% by weight, and a stage there buys nothing. The staircase, the relative volatility that decides whether a column is worth building, and the three industrial ways round the azeotrope.

Library artifact · ETHANOLExplore the artifact →

Heat & energy

Steam Is Priced By Pressure

The same kilogram of steam costs more at forty bar than at six, and not because it carries more heat. The utility ladder with real Ontario prices on every rung, and the line calculation that turns a heat duty into cents per kilogram of product.

Library artifact · STEAMExplore the artifact →

Heat & energy

The Pinch: A Plant That Heats Itself

Pinch analysis in one graph: stack every hot stream into one curve, every cold stream into another, slide them to ΔTmin, and read the minimum steam and cooling water straight off the overhangs. Worked example, the three rules, and why moving heat across the pinch costs you twice.

Library artifact · PINCHExplore the artifact →

Flow & equipment

Pump curves, system curves and throttling cost

Explore pump and system curves, move the operating point, and calculate the energy dissipated across a throttling valve.

Library artifact · CURVEExplore the artifact →

Flow & equipment

Why compressors need intercooling

Explore compressor stages and intercooling with a temperature calculator, a hydrogen example and a five-stage P&ID.

Library artifact · STAGESExplore the artifact →

Flow & equipment

Check the suction side

Why pumps cavitate, what NPSH3 means, and an interactive suction-side NPSH worksheet.

Library artifact · CAVITATIONExplore the artifact →

Process design & scale-up

Why high yield does not mean low cost

Yield, atom economy and cost per kilogram are different measures. Explore the ibuprofen comparison and a worked cost example.

Library artifact · YIELDExplore the artifact →

Process design & scale-up

Why scale changes heat removal

Why ten times the volume means less than half the cooling per litre. Explore the scale-up calculation, thermal feedback loop and sources.

Library artifact · RUNAWAYExplore the artifact →

Process design & scale-up

The Gap Between a Reaction That Works and a Process That Can Be Built

Between a reaction that works in a flask and a process that can be built and sold sits a mountain of work, nearly all of it inside simulation software that takes most of a year to learn. A lot of excellent chemistry never gets assessed at scale because of it.

Library artifact · GAPExplore the artifact →

Flow & equipment

The Pump You Sized Does Not Exist

School has you size an ideal pump and stop. A plant opens a catalogue, finds the curve that covers your duty point with margin, and accepts that it is slightly wrong in every direction. The price is rarely on the page.

Library artifact · PUMPExplore the artifact →

Heat & energy

Cement Is 8 Percent of Global Emissions, and the Fuel Is Not the Main Problem

Making clinker cooks limestone into lime, and that reaction releases CO2 no matter what you burn. A fourth-year capstone design that burns the kiln fuel in pure oxygen, purifies the exhaust and puts the carbon back into carbonate rock.

Library artifact · CEMENTExplore the artifact →

Chemistry & materials

The Chemist Ranks the Powder. The Engineer Buys the Cube.

Every absorbent material is ranked as a loose powder and bought as a pressed solid. Pressing costs 10 to 15 percent of the surface area for robust frameworks and up to 43 percent for fragile ones, which is enough to reverse the ranking.

Library artifact · PELLETExplore the artifact →

Process design & scale-up

Five Things a Chemist Sees on Their First Walk Through a Plant

The mixers move the whole tank, the drums weigh more than a pickup, a plant is twenty floors of pipe, and absorbers and strippers are the same tower shape doing opposite jobs. Five things that shock a chemist on day one inside a plant.

Library artifact · PLANTExplore the artifact →

Separations

Why the Solvent Dies and the Model Never Saw It Coming

Flue gas carries oxygen, oxygen attacks the amine, and the heat-stable salts it leaves behind cannot release CO2, corrode steel and raise the energy bill. Published capture models generally do not include any of it.

Library artifact · CAPTUREExplore the artifact →

Simulation & software

The Three Things Process Engineers Hate About Their Simulation Software

Three hundred discovery calls with process engineers, and everyone hates the same three things about their simulation software: the setup grind, convergence that will not say why, and licensing that belongs in 1998.

Library artifact · THREE THINGSExplore the artifact →

Simulation & software

What reviewed, verifiable AI automation means in process simulation

Why AI tools that write to a simulator should verify every change by reading it back, and gate every reported result, before an engineer trusts a word.

Engineering noteRead the note →

Simulation & software

Can AI drive Aspen Plus? How natural-language control of a process simulator actually works

What programmatic control of Aspen Plus really is, what an AI agent can do with it today, and why write verification and review gates decide whether you can trust it.

Engineering noteRead the note →

Simulation & software

AI copilot vs. homegrown scripts for process simulator automation

An honest comparison of Python/VBA COM scripting and an AI copilot for Aspen Plus automation, including when the plain script is still the right tool.

Engineering noteRead the note →

Simulation & software

Using an AI copilot to troubleshoot simulation convergence failures

A practical look at how an AI copilot turns convergence troubleshooting from guess-and-rerun into one verified change at a time.

Engineering noteRead the note →

Simulation & software

How Reflux came to be

The product intuition behind visible, reviewed simulation workflows.

Engineering noteRead the note →

Simulation & software

Visible distillation train

How a reviewed process-study flow can make simulator work easier to inspect.

Engineering noteRead the note →

Simulation & software

Template-backed generation

Using known-good cases and templates as the starting point for repeatable runs.

Engineering noteRead the note →

Simulation & software

Desktop simulator adapter

How local simulator control becomes a reviewable product surface.

Engineering noteRead the note →

Simulation & software

Reviewed plans for process models

Why the review gate is central to agentic process-model automation.

Engineering noteRead the note →

FROM UNDERSTANDING TO BUILDING

Taking a real process
beyond the lab?

Jon and I are building RARE Labs toward an autonomous pilot plant builder using AI and robotics. Join the waitlist for updates, and tell us what you’re trying to scale.

Join the RARE Labs waitlist ↗