RARE Labs

ENGINEERING EXPLAINED / PUMP SUCTION

A test criterion is not a cavitation guarantee.

Explore NPSH₃, then separate the pump requirement from the suction head available in the system.

By Nathan, chemical engineer and co-founder of RARE Labs.

READ THE CRITERION

Three percent is a test point.

Relative developed head

Fixed flow and speed. NPSH₃ = 3 m in this invented example. This curve is a mathematical illustration, not measured pump performance.

NPSH₃ marks a 3% reduction in developed head under its test conditions (first-stage head for a multistage pump). It does not mark the first bubble or guarantee freedom from cavitation. Confirm what criterion the supplier’s curve actually uses.

SEPARATE THE SYSTEM CHECK

What suction head does the system provide?

NPSH available

NPSHₐ = (Psurface,abs − Pvapor) / (ρg) + z − hloss
Pressures converted from kPa to Pa; g = 9.80665 m/s².

Assumes a large supply reservoir with negligible surface velocity, steady incompressible flow, no suction-side energy addition, and losses from the reservoir to the pump. Elevation is positive when the liquid surface is above the pump reference. Use absolute pressure and the vapor pressure at the actual liquid temperature.

The difference shown is arithmetic head margin, not a pass/fail verdict. The necessary margin depends on the pump, fluid, flow range and service. Examine the lowest level, highest relevant temperature, operating flow range, suction losses and transients with the supplier and applicable guidance.

Sources: Hydraulic Institute: NPSH definitions, reservoir calculation and 3% criterion · Hydraulic Institute: NPSH margin and operating regions.

RARE LABS

From lab chemistry to production.

We are building an autonomous scale-up system for chemistry using robotics and AI, starting with peptides and pharma.

About RARE Labs ↗

Join the RARE Labs waitlist ↗