Heat & energy / INTERACTIVE LESSON 31
100°C is only the beginning of the energy bill
Follow one kilogram from warm water to vapor—and watch where the extra energy goes.
CHANGE A CONDITION. SEE WHAT FOLLOWS.
Teaching modelEnlarge for bigger labels, then swipe sideways →
The water is at about 100°C. After the first 334 kJ, another 0 kJ has vaporized 0% of the original kilogram. The remaining liquid and produced vapor still add to 1 kg.
What this model assumes
One kilogram starts at 20°C, heated at roughly atmospheric pressure. Rounded teaching values match the recording: 334 kJ for warming and 2,257 kJ for vaporization. Effective constant heat capacity is 334/80 = 4.175 kJ/(kg·K). Liquid and vapor coexist at about 100°C during boiling. Vapor is counted after it leaves the vessel. No heat losses, vessel heating, pressure changes or superheating are included. This is an energy ledger, not a time or boiler-rating simulation.
THE IDEA TO TAKE WITH YOU
Getting hotter and changing phase are different jobs.
This example follows 1 kg of water from 20°C at roughly atmospheric pressure. Heating it to about 100°C takes approximately 334 kJ. That energy changes its temperature: sensible heat.
At the boiling point, more energy can convert liquid into vapor without raising the temperature of the boiling mixture. Vaporizing the whole kilogram takes about 2,257 kJ more. That is latent heat.
The phase-change contribution is about 6.76 times the initial warming contribution. The complete rounded energy bill is 334 + 2,257 = 2,591 kJ. Stopping at m cₚ ΔT would miss most of this particular duty.
The split is not universal. Starting temperature, mass, pressure and final phase all matter. Real equipment also has losses and metal to heat. This idealized lesson stops at vapor at the boiling point; it does not heat the steam further.
QUICK CHECK
At 1,462.5 kJ added, what has happened to the original kilogram?
FROM UNDERSTANDING TO BUILDING
Taking a real process
beyond the lab?
Jon and I are building RARE Labs toward an autonomous pilot plant builder using AI and robotics. Join the waitlist for updates, and tell us what you’re trying to scale.
FOLLOW THE EVIDENCE
Go a little deeper.
- OpenStaxPhase changes and latent heat ↗
Temperature plateaus during phase change and the approximately 2,256 kJ/kg latent heat of water near its normal boiling point. This lesson rounds to the recording’s 2,257 kJ/kg.
- NISTThermodynamic properties of water and steam (NISTIR 5078) ↗
Reference water and steam properties; precise values depend on state and pressure. The lesson uses rounded values and an effective constant heat capacity.