Where does the energy go when you slow down?

Change an illustrative stop and follow the portions stored in the battery, dissipated at friction brakes and lost to the surroundings.

One stop. An energy budget.

For any nonzero starting speed, call the initial kinetic-energy budget 100 units. The sliders choose an illustrative partition; they do not estimate a particular EV.

100 units of motion energy
45 units reach the battery, 40 reach the friction brakes, and 15 reach other losses.

Illustrative energy paths. Each width follows its allocated units.

Invented allocations per stop
DestinationEnergy units
Stored in battery45.0
Heat at friction brakes40.0
Other losses to surroundings15.0
Total accounted for100.0

45 units reach the battery, 40 become friction-brake heat and 15 go to other losses. Total: 100 units. These are invented teaching allocations.

Invented battery cap: 45 units. Invented low-speed multiplier: 1.

Invented rules and model limits

Battery cap = 75 × (1 − battery state / 100). Low-speed multiplier = the smaller of speed / 20 and 1. Stored units = the smallest of requested regeneration, 100 − other-loss share and battery cap, multiplied by the low-speed multiplier. Friction-brake units are the remainder. The 75-unit cap, linear battery rule and 20 km/h scale are invented teaching choices, not measured limits or a universal EV efficiency curve.

At zero initial speed, the stop has zero kinetic energy, so all allocations are zero. At nonzero speeds, 100 units is a fresh normalization for each stop: it does not mean a slow car and a fast car contain the same energy. Temperature, traction, deceleration rate, mass, accessory loads and detailed controls are omitted. Real vehicles blend braking according to their own limits. “Loss” means energy transferred to less useful forms or the surroundings, not energy destroyed. All three allocations are final destinations, so conversion losses are included only in the other-loss allocation.

Regeneration recovers a portion of energy already spent getting moving.

During regeneration, the wheels drive an electrical machine operating as a generator. The opposing torque helps slow the vehicle, and some electrical energy returns toward the battery.

Friction brakes turn motion into heat. Regeneration and friction braking can share the work. Battery acceptance, vehicle controls and operating conditions limit recovery; electrical and road losses remain.

This exercise makes the energy accounting explicit. A fuller battery or a low-speed limit reduces the invented stored portion, and friction brakes take the remainder after the chosen other losses. A real car requires its own measured data and control model. None of the displayed percentages is a recovery promise.

Is all of the starting kinetic energy stored in the battery?

Taking a real process
beyond the lab?

Jon and I are building RARE Labs toward an autonomous pilot plant builder using AI and robotics. Join the waitlist for updates, and tell us what you’re trying to scale.

Join the RARE Labs waitlist ↗

Go a little deeper.