Thermodynamics / INTERACTIVE LESSON 08

When pressure needs a correction

Compare pressure with fugacity using an explicit, chosen fugacity coefficient.

CHANGE A CONDITION. SEE WHAT FOLLOWS.

Teaching model
Illustrative fugacity comparisonAt 20 bar and chosen phi 0.7, fugacity is 14 bar.Fugacity: pressure with a thermodynamic roleIllustrative φ only — no real gas is being predicted.Ideal reference: f = P = 20 barChosen φ = 0.7: f = 14 bar050100150200φ = 1 restores ideal-gas fugacity.μ − μideal = RT ln φ = −0.89 kJ/mol

Enlarge for bigger labels, then swipe sideways →

Illustrative fugacity, f14 bar
Ideal reference, fideal20 bar
Chosen coefficient, φ0.7
μ − μideal at the same T, P−0.89 kJ/mol

With the chosen φ = 0.7, f = φP = 14 bar. Fugacity is the pressure-like variable used to express chemical potential; it is not an extra pressure on a gauge. At 300 K, μ differs from the ideal-gas reference at the same temperature and pressure by −0.89 kJ/mol. Changing temperature here holds your illustrative φ fixed; it does not calculate how any actual gas behaves.

What this model assumes

Illustrative pure-gas comparison only. The fugacity coefficient φ is chosen by the reader; it is not predicted by an equation of state or measured gas data. At one specified state, f = φP and μ − μideal(T,P) = RT ln φ. A real gas needs a thermodynamically consistent φ(T,P) model or data, with φ → 1 as P → 0. φ is not the compressibility factor Z.

THE IDEA TO TAKE WITH YOU

Fugacity lets engineers retain a useful chemical-potential relationship when a gas is not ideal.

For a pure gas, f = φP. The fugacity coefficient φ expresses departure from the ideal-gas reference.

Here you choose φ to see its mathematical effect. A real calculation would obtain φ from an appropriate model or data at the specified conditions.

At phase equilibrium, a component has equal fugacity in coexisting phases at common temperature and pressure. Mixtures need component definitions, not just the pure-gas formula.

QUICK CHECK

Does a displayed fugacity of 8 bar mean a pressure gauge reads 8 bar?

FROM THE VIDEO · CHANGE THE CONDITIONS

Equal fugacity. Unequal amounts.

An equilibrium condition is not a 50/50 split.

An equilibrium condition is not a 50/50 split.

Hold the total amount fixed. Change the phase volumes or the chosen partition ratio. Watch the amounts redistribute while the normalized fugacities remain equal.

Assumptions and limits

Two dilute phases at fixed temperature and pressure; fixed total amount of 1 mol and phase A volume of 1 L. Chosen constant K = cB/cA defines equilibrium. We use fA/fref = cA/(1 mol/L) and fB/fref = cB/[K(1 mol/L)] only as a normalized illustrative model. Neither K nor fref is a prediction for a named chemical. Equal fugacity follows from equal chemical potential with consistent reference states; real phase models require validated data.

Use the source links below for the underlying thermodynamics and transport models.

FROM UNDERSTANDING TO BUILDING

Taking a real process
beyond the lab?

Jon and I are building RARE Labs toward an autonomous pilot plant builder. Join the waitlist for updates, and tell us what you’re trying to scale.

Join the RARE Labs waitlist ↗

FOLLOW THE EVIDENCE

Go a little deeper.