Mathematics + heat / INTERACTIVE LESSON 09

Your coffee is doing calculus

Watch a temperature gap shrink and see how a simple rate rule creates a cooling curve.

CHANGE A CONDITION. SEE WHAT FOLLOWS.

Teaching model
The temperature gap shrinks exponentiallyTemperature (°C)020406080100015304560Selected: 15 min → 48.3 °CTime (min)

Enlarge for bigger labels, then swipe sideways →

Drink temperature48.3 °C
Gap remaining47.2 %
Gap half-life13.9 min

The drink cools toward 20 °C without crossing it. After 15 minutes, 47.2% of its initial temperature difference remains. Doubling elapsed time repeats the fractional change; it does not subtract the same number of degrees.

What this model assumes

Newton’s lumped-temperature model: T(t) = Ta + (T0 − Ta)e^(−kt). The selectable constant k is illustrative, not fitted to a real cup. Assume a uniform drink temperature, constant room temperature and constant effective heat-transfer properties. Evaporation, changing airflow, stirring and the cup are not resolved separately. Celsius temperature differences are valid here.

THE IDEA TO TAKE WITH YOU

A differential equation can describe how a simple rule changes something over time.

Newton’s cooling model says the rate is proportional to the gap between the object and its surroundings.

Solving dT/dt = −k(T − Ta) gives an exponential approach to room temperature. The same fraction of the gap disappears in each equal time interval.

The chosen coefficient summarizes heat transfer in a simplified, uniform-temperature model. Evaporation, changing conditions and the cup itself can change a real cooling curve.

QUICK CHECK

With a positive model coefficient, does a drink cross through room temperature?

FROM THE VIDEO: THE RATE FOLLOWS THE GAP

The gap halves. The temperature does not.

One row per interval. The interval length is deliberately unspecified.
IntervalTemperatureGap to roomDrop
k per interval, −ln(fraction)0.693
Closed formT = 20 + 60 × 0.50ⁿ
Closed form, checked80.0 °C at n = 0

Step it forward.

Newton’s rule, dT/dt = −k (T − Troom), says the coffee loses heat in proportion to how far it sits above the room. Take it in equal intervals and each one leaves the same fraction of the gap. The video’s illustrative numbers: a cup at 80 °C in a 20 °C room reads 50 after one interval and 35 after another, so the gap goes 60, 30, 15 while the temperature goes 80, 50, 35. That is an exponential curve: the situation now sets what happens next.

A model, not a universal stopwatch: evaporation, the mug, airflow and changing conditions all change how long an interval is, so no interval length is claimed here. Temperature differences in Celsius are the same size as in kelvin, so Celsius is fine for the gap.

What this assumes

A lumped model: one coffee temperature, a constant room temperature, and a constant fraction of the gap left per interval. That is the discrete form of dT/dt = −k (T − Troom): k = −ln(fraction) per interval and Tn = Troom + (T0 − Troom) × fractionn. The interval length is unspecified on purpose and no coffee cooling coefficient is claimed. The 80, 50, 35 sequence is the video’s illustration, not measured data. The straight-line comparison repeats the first interval’s drop forever; it is there to be wrong.

Sources: MIT OCW, Differential Equations Topic 2: Models ↗ · University of Utah, Exponential Modeling ↗ · NIST, Eric Cornell on evaporative cooling ↗

FROM UNDERSTANDING TO BUILDING

Taking a real process
beyond the lab?

Jon and I are building RARE Labs toward an autonomous pilot plant builder. Join the waitlist for updates, and tell us what you’re trying to scale.

Join the RARE Labs waitlist ↗

FOLLOW THE EVIDENCE

Go a little deeper.