Thermodynamics / INTERACTIVE LESSON 06
Where does the heat go?
Heat an ideal gas with a fixed wall or a moving piston. Keep the energy accounts visible.
CHANGE A CONDITION. SEE WHAT FOLLOWS.
Teaching modelEnlarge for bigger labels, then swipe sideways →
At constant pressure, Wby = nRΔT, so Q = ΔH. Part of the heat transfer is associated with boundary work. For the same n and ΔT, both paths have the same ΔU = (3/2)nRΔT and ΔH = (5/2)nRΔT, but different heat and work. Here ΔH − ΔU = +0.831 kJ. Negative Q means heat leaves the gas; negative Wby means the surroundings do work on it.
What this model assumes
Closed, ideal monatomic gas with constant molar heat capacities Cv = 3R/2 and Cp = 5R/2. Initial T = 300 K and P = 100 kPa. Only pressure–volume boundary work is allowed; the constant-pressure piston moves quasi-statically. Q is positive into the gas and Wby is positive when the gas does work: ΔU = Q − Wby. No reaction, phase change, or change in bulk kinetic/potential energy is included.
THE IDEA TO TAKE WITH YOU
Enthalpy packages internal energy and the pressure–volume term into a useful state property.
For a closed system with only pressure–volume work, heat added supplies internal-energy change and work done on the surroundings.
At constant volume, there is no boundary expansion work. At constant pressure, a heated gas can expand and push a piston.
Under the stated constant-pressure assumptions, Q equals ΔH. Heat is energy transferred during a process; enthalpy is a state property.
QUICK CHECK
For the same temperature rise in this ideal gas, which case needs more heat?
FROM THE VIDEO: THREE CONDITIONS, AND THE COST OF MAKING ROOM
When is the heat exactly ΔH?
Check the conditions
The payoff in the video has three small-print conditions. Switch any of them off and the bookkeeping changes.
What the checker assumes
Closed-system energy balance ΔU = Q − W with W the work done by the system. Changes in the system’s overall kinetic and potential energy are neglected. H = U + pV is a property definition; pV is only equal to the boundary work in the constant-pressure case shown here, not in an arbitrary process.
Price the room
Heating a gas under a free piston does two things: it raises the internal energy U and it pushes the surroundings back. Choose the pressure and the expansion to see the second part in joules.
Source: OpenStax Chemistry 2e §5.3, enthalpy and constant-pressure heat ↗
FROM UNDERSTANDING TO BUILDING
Taking a real process
beyond the lab?
Jon and I are building RARE Labs toward an autonomous pilot plant builder. Join the waitlist for updates, and tell us what you’re trying to scale.
FOLLOW THE EVIDENCE
Go a little deeper.
- OpenStax / Rice UniversityChemistry 2e 5.3 Enthalpy ↗
H = U + pV; heat/work are transfers, not stored state properties; constant-pressure enthalpy change under appropriate work conditions.
- NASA Glenn Research CenterEnthalpy ↗
Definition of enthalpy combining internal energy with pressure-volume term.
- MIT OpenCourseWare5.60 Lecture 4: Enthalpy ↗
Enthalpy derivation and constant-pressure heat connection; lecture PDF also read through the university OCW mirror at ocw.tau.edu.ng.