A short RNA strand needs a lot of washes.
Follow one add-a-letter cycle, then count what happens when two short strands are made. The first letter changes the arithmetic.
Enlarge for bigger labels, then swipe sideways →
For 20 letters, the rough count is 80 steps and 80 washes per strand, or 160 of each for a pair. With the first letter preloaded, 19 extension cycles give 76 steps and washes per strand, or 152 of each for the pair.
What this model assumes
Rough count: four operations × letters per strand; washes equal operations. A support with the first nucleotide already attached needs letters minus one extension cycles: a 20-mer requires 19 cycles, 76 operations and 76 washes in this simplified convention. Final deprotection, cleavage, annealing, purification, coupling efficiency, yield and sequence-specific differences are excluded. “Unlock, attach, block, lock” is shorthand for deblocking, coupling, capping and oxidation or sulfurization. Wash volume is not inferred from the wash count. The acetonitrile figures below are reported process estimates, not outputs of this calculator.
Solvent use is a separate estimate.
Reported acetonitrile estimates per kilogram of oligonucleotide. The marker is a rough reference, not a calculated mean or a prediction from the letter count. Sources use different process boundaries.
Repeated operations turn a short sequence into many separate washes.
In solid-phase oligonucleotide synthesis, a strand grows while attached to a support. Each extension cycle unlocks the end, couples the next nucleotide, caps chains that missed coupling, and oxidizes or sulfurizes the new linkage. Washes between operations remove residual reagents.
The quick arithmetic is four steps per letter: 80 steps for a 20-letter strand, or 160 for two. With the first nucleotide preloaded, a 20-letter strand actually needs 19 extension cycles: 76 operations in this simplified count, or 152 for two. The wash totals here follow the same convention.
Counting washes does not calculate litres of solvent. Wash volume, column size, sequence, yield, purification and solvent reuse all affect consumption. Acetonitrile use is a separate reported process estimate, not a consequence of multiplying the letter count.
A commercial-scale example reported 872 litres of acetonitrile per kilogram of oligonucleotide for synthesis, and 1,320 litres per kilogram when annual plant use was included. A plant-wide figure includes uses beyond the synthesis cycles shown here. These figures are examples, not a universal recipe.
The broad acetonitrile band combines source estimates with different boundaries. An SK pharmteco/Ionis recovery poster reports 800–1,600 L/kg, about 630–1,260 kg/kg using 0.786 kg/L. A patent describes a typical solid-phase example using about 3,000 kg/kg. The marker near 1,000 kg/kg is a rough reference, not a statistical average or a result calculated here.
How many extension cycles does a 20-letter strand need when the first letter is preloaded?
Taking a real process
beyond the lab?
Jon and I are building RARE Labs toward an autonomous pilot plant builder using AI and robotics. Join the waitlist for updates, and tell us what you’re trying to scale.
Go a little deeper.
- Andrews et al. · Journal of Organic Chemistry (2021)Sustainability challenges and opportunities in oligonucleotide manufacturing ↗
Four-step synthesis cycle, washes and the material burden of manufacturing.
- Pharmaceutical Technology · commercial-scale process exampleDesigning commercial-scale oligonucleotide synthesis ↗
Reported synthesis and annual plant acetonitrile consumption; these are separate process boundaries.
- SK pharmteco / IonisAddressing the ACN supply by implementing recovery and reuse strategies ↗
Reported 800–1,600 L/kg range. Previously verified on 2 November 2026; the host blocked access when rechecked on 6 November.
- Patent WO2023170657A1Oligonucleotide synthesis process disclosure ↗
Typical solid-phase example quoted near 3,000 kg acetonitrile per kg API; a patent estimate, not a universal measured value.