MATERIALS + HEAT · COLDER

Same room.
Different handshake.

Metal and wood can both be at 22 °C. Change the material and see how the first contact with warm skin changes.

MOVE THE MATERIAL. KEEP THE TEMPERATURE.

What happens where skin meets the surface?

Skin starts at 34 °CMaterial starts at 22 °C22.5 °C22 °C34 °C
INITIAL CONTACT22.5 °C
SKIN HEAT FLUX VS OAK3.2×

With aluminium, the ideal initial contact is approximately 22.5 °C; with red oak it is approximately 30.5 °C.

An ideal initial-contact calculation, not a prediction of sensation or burn risk.

Show the equation and assumptions

e = √(kρcp) combines conductivity, density and specific heat capacity. For two semi-infinite bodies in perfect contact, Tc = (esTs + emTm)/(es + em).

Here, skin starts at 34 °C, the object at 22 °C, and skin effusivity is rounded to 1,100 W s½/(m² K). This idealization omits coatings, moisture, contact resistance, circulation and finite thickness. Its interface temperature is the initial ideal contact value; the animation does not claim a measured cooling time.

At the same elapsed time, heat flux is proportional to esem/(es+em) for fixed starting temperatures.

WHERE THE NUMBERS COME FROM

One room. Three materials.

MaterialEffusivity
W s½/(m² K)
Contact
temperature
Red oak46230.5 °C
Carbon steel16,04022.8 °C
Aluminium23,68822.5 °C

Nominal material values from Thermtest. Contact temperatures are calculated here using the stated assumptions. Properties depend on composition, temperature and, for wood, direction and moisture.

NOW CHANGE THE ENGINEERING QUESTION

A reactor jacket needs the whole heat path.

For sustained cooling, use Q̇ = UAΔT. Effusivity helps describe an initial transient. It alone cannot tell you whether a jacket will cool a reaction.

Try improving the batch-side film coefficient. Compare its effect with changing the wall material.

OVERALL COEFFICIENT U313.7 W/(m² K)
ILLUSTRATIVE DUTY18.8 kW

Orange: batch film · grey: wall · teal: jacket film

The model includes both fluid films and the wall.

Assumptions and limits

Plane-wall approximation:1/U =1/hbatch +δ/kwall +1/hjacket. Fixed wall thickness 3 mm, area 2 m², temperature difference 30 K and jacket film coefficient 1,000 W/(m² K). Film coefficients are illustrative controls, not design correlations. Fouling, vessel curvature, varying temperature, reaction heat generation and coolant limits are omitted. A real design also needs those constraints and process-specific evidence.

FROM UNDERSTANDING TO BUILDING

Taking a reaction
beyond the lab?

Jon and I are building RARE Labs toward an autonomous pilot plant builder with AI and robotics. Join the waitlist and tell us what you are trying to scale.

Join the RARE Labs waitlist ↗

FOLLOW THE EVIDENCE

Sources and derivation.