Materials + heat / INTERACTIVE LESSON 14
Same temperature. Different feeling.
Put different materials at the same temperature and compare an ideal initial contact temperature.
CHANGE A CONDITION. SEE WHAT FOLLOWS.
Teaching modelEnlarge for bigger labels, then swipe sideways →
Stainless steel: nominal k = 15 W m⁻¹ K⁻¹, ρ = 7,900 kg m⁻³ and cp = 500 J kg⁻¹ K⁻¹. The skin-side model uses k = 0.37, ρ = 1,100 and cp = 3,500 in the same units. The interface temperature is weighted toward the body with greater effusivity. In this ideal semi-infinite model, contact temperature stays constant while instantaneous heat flux falls as 1/√t. Compare materials at the same starting temperature; heat transfer helps explain sensation, but this is not a thermometer or a full physiology model.
What this model assumes
Early-time contact model for two uniform, homogeneous, semi-infinite bodies in perfect thermal contact, with constant properties and no contact resistance. Effusivity e = √(kρcp), in J m⁻² K⁻¹ s⁻½. Contact temperature Tc = (es·Ts + eo·To)/(es + eo). Signed heat flux from skin to object is q″ = [es·eo/(es + eo)](Ts − To)/√(πt). All material and skin-side values are nominal illustrations; coatings, finite thickness, moisture, texture, blood flow and changing contact are omitted. This is not a measured skin-response prediction.
THE IDEA TO TAKE WITH YOU
Your hand senses a heat-transfer response. A thermometer measures a different thing.
A room-temperature metal object often draws heat from a warmer hand faster than wood does.
Thermal effusivity combines conductivity, density and heat capacity. It helps describe the early response when two bodies touch.
The simple contact model assumes uniform initial temperatures, ideal contact and effectively thick bodies. Skin, contact pressure, coatings and finite thickness change real touch.
QUICK CHECK
Does colder-feeling metal have to start at a lower temperature than wood?
FROM THE VIDEO · CHANGE THE CONDITIONS
Same temperature. Two thermal handshakes.
Compare the contact response side by side.
Compare the contact response side by side.
Both objects start at the temperature you choose. Change that temperature and watch which way heat travels. Advance time to see the instantaneous flow weaken.
Assumptions and limits
The same ideal semi-infinite, perfect-contact model as the experiment above. Skin-side starts at 33 °C. Stainless steel and wood use the nominal properties stated above. This comparison predicts neither subjective sensation nor burn risk. Coatings, moisture, contact resistance, thickness and circulation are omitted. Temperature changes here are virtual; no hot-object experiment is suggested.
Use the source links below for the underlying thermodynamics and transport models.
FROM UNDERSTANDING TO BUILDING
Taking a real process
beyond the lab?
Jon and I are building RARE Labs toward an autonomous pilot plant builder. Join the waitlist for updates, and tell us what you’re trying to scale.
FOLLOW THE EVIDENCE
Go a little deeper.
- Georgia State University / HyperPhysicsWood and Metal ↗
At the same room temperature metal removes heat from a finger faster than wood.
- OpenStax / Rice UniversityCollege Physics 2e 14.5 Conduction ↗
Heat transfer proceeds down temperature differences and depends on conductivity/material/geometry.
- Purdue / Dan Chavas teaching materialsInteractive Heat Transfer ↗
Thermal effusivity depends on conductivity, density and heat capacity and helps explain tactile temperature.