Where does hydration heat go?

Change the size and surface cooling of a qualitative concrete model. Compare what happens at its centre and surface.

Heat generation and escape

The centre can stay warmer than the surface.

The same heat source acts throughout the material. Increase the relative thickness to give heat a longer path to the exposed surface. Then change how strongly that surface loses heat.

The section shows one half of a symmetric placement. Orange indicates a larger temperature rise in this illustration.
Teal: centre. Orange: surface. Axes use dimensionless model units, not degrees or hours.

What this model assumes

A one-dimensional, symmetric half-slab starts at the surrounding temperature. A fixed, positive hydration heat source rises and decays uniformly. Heat diffuses through the material and leaves at one exposed surface. The centre has no heat flow across the symmetry plane. Thermal properties are constant. The controls change relative geometry and boundary heat loss; they are not construction dimensions or site settings.

Baseline: relative half-thickness 1, surface loss 0.25 and model time 3.20. The illustrative equations use diffusivity 0.20 and heat generation 3t exp(−2t), in normalized units. They are not calibrated to a concrete mix. The model cannot predict stress, cracks, strength or a curing schedule.

Moisture protection is another part of curing.

Covering a surface can help retain moisture for hydration. Heat transfer and moisture loss are related parts of curing, but a cooler surface does not by itself mean the concrete is being cured well. This experiment models heat only.

Why can the centre and surface have different temperatures?

Taking a real process
beyond the lab?

Jon and I are building RARE Labs toward an autonomous pilot plant builder using AI and robotics. Join the waitlist for updates, and tell us what you’re trying to scale.

Join the RARE Labs waitlist ↗

Sources