A small speed change can mean a larger power change

Move the fan speed control, calculate the ideal affinity ratios, then see why the system curve matters.

Ideal affinity comparison

Turn the speed up by ten percent.

For the same fan and density at similar operating conditions, flow follows speed, pressure follows speed squared, and shaft power follows speed cubed.

Flow ratio
Pressure ratio
Shaft power ratio
Ratios are relative to the baseline speed. A power ratio of 1.331 means 33.1% more shaft power in this ideal comparison.

An illustrative installed system

The intersection is the operating point.

Keep the speed above, then change resistance. The dark fan curve and orange system curve meet at a different flow and pressure.

These are teaching curves, not a manufacturer's performance data. No electrical power or bill is calculated.

Equations, baseline and limits

The first comparison uses Q₂/Q₁ = r, Δp₂/Δp₁ = r² and P₂/P₁ = r³, where r is the speed ratio. It assumes fixed diameter and density and similar operation. The normalized teaching fan curve is Δp = 1.5r² − 0.5Q²; the system curve is Δp = RQ², with no static-pressure offset. Their intersection is Q = √(1.5r²/(R + 0.5)). Baseline controls are r = 1.10 and R = 1.00.

Changing resistance moves the operating point. Real efficiency, density, motor and drive losses, static pressure and actual performance curves matter. The illustrative curves do not predict a real fan or establish energy savings.

Under the stated ideal affinity assumptions, what is the shaft-power ratio at 1.1× speed?

Taking a real process
beyond the lab?

Jon and I are building RARE Labs toward an autonomous pilot plant builder using AI and robotics. Join the waitlist for updates, and tell us what you’re trying to scale.

Join the RARE Labs waitlist ↗

Sources