FLUID MECHANICS · REYNOLDS

No units.
A different kind of flow.

A ratio compares inertia with viscosity. Move one control and watch the number explain why a smooth dye line can give way to mixing.

Change the pipe flow

REYNOLDS NUMBER1,000
TYPICAL PIPE REGIMELaminar
RE = ρvD / μ1000 × 0.02 × 0.05 / 0.001
Laminar
< 2,300
Transition
2,300–4,000
Turbulent
> 4,000

Motion is a qualitative illustration, not a computed velocity field. The animation shows downstream flow and cross-stream mixing; its visual speed is compressed for readability.

TRY ONE CHANGE AT A TIME

Increase speed, then increase viscosity. Which change restores smooth flow?

Logarithmic control: 1 to 1,000 mPa s.

Inertia is about 1,000 times the viscous scale. This lies in the usual laminar range.

Assumptions and limits

Fixed density: 1,000 kg/m³. The fluid is incompressible and Newtonian; the pipe is straight and circular. Values are illustrative, not a property database. Temperature, entrance conditions, roughness and disturbances affect transition. Some texts use 2,000 or 2,100 as the lower guide. These thresholds do not apply unchanged to stirred tanks or every flow geometry.

WHAT A MATCH REALLY MEANS

Same ratio.
Not every detail the same.

Honey and water can have the same Reynolds number when speed, size, density and viscosity balance. That matches the relative importance of inertia and viscosity.

Dynamic similarity also needs compatible geometry and boundary conditions. Heat transfer, diffusion, reaction and other forces can introduce other dimensionless groups. Matching Re alone does not make two reactors equivalent.

SCALE-UP AT FIXED RPM

Wider impeller. Squared effect.

Reference: D = 0.10 mScaled: D = 0.10 mSame rpm · vessels drawn at a compressed visual scale
REFERENCE Re20,000
SCALED Re20,000
REYNOLDS MULTIPLIER1×
Diameter1×
Re1×

SAME FLUID. SAME RPM.

Change impeller diameter

1× diameter gives 1× Reynolds number at fixed rpm.

Re = ρND² / μ

N = 120 rpm = 2 s⁻¹. Reference impeller D =0.10 m; ρ =1,000 kg/m³; μ =0.001 Pa s. Geometrically similar vessels and impellers. The diagram is schematic; its drawn size and rotational rate are for comparison.

Why “ten times bigger” needs a unit

Ten times the impeller diameter gives 100 times Re at fixed rpm. Ten times the vessel volume, for similar geometry, gives a diameter factor of 10⅓ and a Reynolds factor of 10⅔, about 4.64. Neither calculation alone predicts mixing time, yield, heat removal or reaction safety.

FROM THE FLASK TO THE PILOT

Taking a reaction
beyond the lab?

Jon and I are building RARE Labs toward an autonomous pilot plant builder with AI and robotics. Join the waitlist and tell us what you are trying to scale.

Join the RARE Labs waitlist ↗

FOLLOW THE EVIDENCE

Sources and model limits