A moving pinch can pump liquid

Advance a peristaltic rotor and follow liquid inside the tube. Then explore an incomplete seal.

A qualitative pumping cycle

Follow the liquid between moving pinches.

The rollers stay outside the intact tube. Advance the rotor and watch the closed region move, then watch the tube recover behind it.

Orange marks liquid inside the tube. Deformation and tracer motion are schematic, not a dosing calculation.
What the tube changes

A roller squeezes the tube against a curved track. Moving closure displaces liquid ahead. The tube recovers behind the roller, allowing the inlet region to refill.

An incomplete pinch leaves an open passage. With opposing outlet pressure, liquid can leak backward through that gap. The controls illustrate this possible failure mode; they do not predict a leakage rate.

Tube material, chemical compatibility, fatigue, occlusion and operating conditions affect performance. Flow can pulsate, and accurate dosing requires calibration. The model makes no sterility or contamination guarantee.

Which component normally touches the pumped liquid?

Taking a real process
beyond the lab?

Jon and I are building RARE Labs toward an autonomous pilot plant builder using AI and robotics. Join the waitlist for updates, and tell us what you’re trying to scale.

Join the RARE Labs waitlist ↗

Sources